Vipnet Windows 11: Restoring Internet After Switching Modes

Vipnet Client 4.3 Internet Connection Recovery Issues When Switching Modes in Windows 11

When switching Vipnet client 4.3 between “internet” and “internal network” modes on Windows 11, a common problem occurs with internet connection recovery. This is related to the specific behavior of Windows 11’s network stacks and the non-standard behavior of VPN clients when changing network configurations. While rebooting the computer is an effective but inconvenient solution, there are alternative methods to restore connectivity without a full system restart.

Table of Contents

• Main Causes of the Problem
• Solutions Without Rebooting
• Preventive Measures
• Additional Settings
• Vipnet Specific Features in Windows 11

Main Causes of the Problem

The issue with internet connection recovery after switching Vipnet modes on Windows 11 is caused by several factors:

Changes in Windows 11 Network Stacks
Windows 11 uses an updated network stack architecture compared to previous versions. According to technical research, these changes can cause VPN clients to not always correctly restore network parameters when changing operational modes.

DNS Configuration Conflicts
When switching Vipnet modes, DNS servers are changed, but Windows 11 may not always handle this change correctly. Experts note that Windows 11 has issues with immediately applying new DNS settings after changing network connection configurations.

Network Parameter Caching
The system caches network parameters, and when switching VPN modes, this cached data can interfere with restoring the correct configuration. Research shows that resetting network settings is often required to clear such conflicts.

Solutions Without Rebooting

Resetting the Network Adapter

One of the most effective methods is to reset the network adapter through the command prompt:

netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns

This sequence of commands resets the Winsock stack, IP configuration, and clears the DNS cache without requiring a reboot. According to Windows Forum research, this approach resolves most connection recovery issues.

Restarting Network Services

Try restarting key network services:

1. Open Task Manager (Ctrl+Shift+Esc)
2. Go to the “Services” tab
3. Find and restart:
   • “Network Connections”
   • “DHCP Client”
   • “DNS Client”
   • “Network Location Awareness”

Using PowerShell

A deeper reset can be performed through PowerShell:

Get-NetAdapter | Disable-NetAdapter -Confirm:$false
Start-Sleep -Seconds 5
Get-NetAdapter | Enable-NetAdapter

This command disables all network adapters for 5 seconds, then re-enables them, forcing the system to reconfigure the network.

Preventive Measures

Regular Vipnet Client Updates

Ensure you have the latest version of Vipnet client installed. Developers often release updates that fix compatibility with newer Windows versions.

Disabling Power Saving for Network Adapter

1. Open “Control Panel” → “Network and Internet” → “Network and Sharing Center”
2. Click “Change adapter settings”
3. Select your network adapter → “Properties”
4. Go to the “Power Management” tab
5. Uncheck “Allow the computer to turn off this device to save power”

Registry Settings

To prevent issues, you can configure registry parameters:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]
"DisableTaskOffload"=dword:00000001
"Tcp1323Opts"=dword:00000003

Additional Settings

DNS Settings in Windows 11

While standard DNS change methods may not work, try the following approaches:

1. Via PowerShell:

Set-DnsClientServerAddress -InterfaceIndex (Get-NetAdapter).InterfaceIndex -ServerAddresses "8.8.8.8","8.8.4.4"

2. Via Group Policy Editor:
   • Open gpedit.msc
   • Navigate: Computer Configuration → Administrative Templates → Network → DNS Client
   • Enable the “Use custom DNS servers” setting

Resetting Network Settings Through Interface

Windows 11 provides a built-in tool for network reset:

1. Settings → Network & Internet → Network Status
2. Click “Network reset”
3. Confirm the action

This method is effective in most cases, but requires a system restart.

Vipnet Specific Features in Windows 11

Compatibility Issues

Vipnet client 4.3 was developed for earlier Windows versions, and its operation with Windows 11 may cause additional complications. Technical specialists recommend using the latest client version or contacting developers for an update.

Alternative Solutions

If the problem persists, consider the following alternatives:

1. Using a virtual machine with an older Windows version
2. Dual boot system with Windows 10
3. Looking for alternative VPN solutions certified for Windows 11

Contact Support

Contact Vipnet technical support with a description of the problem. Include:

• Windows 11 version
• Vipnet client version
• Exact sequence of actions leading to the problem
• Results of executing the proposed solution methods

Sources

1. How to Reset Network Settings in Windows 11 - Step-by-Step Guide
2. Reset Network Adapter in Windows 11 - Detailed Guide
3. Fixing Connectivity Issues in Windows 10/11 - Step-by-Step Guide
4. How to Fix “No Internet Access, But Connected” Issue
5. Reset Network Settings in Windows 11
6. VPN Troubleshooting Guide
7. Random Ethernet Disconnects Since Upgrade to Windows 11
8. How to Fix Wi-Fi Dropping and Disconnection Issues

Conclusion

The problem with internet connection recovery after switching Vipnet modes on Windows 11 is common but solvable. The main solutions include:

1. Resetting network parameters via command prompt or PowerShell
2. Restarting network services for quick connection restoration
3. Configuring power saving settings for the network adapter
4. Updating Vipnet client to the latest version

For problem prevention, it’s recommended to regularly update software, configure registry parameters, and use Windows 11’s built-in tools for managing network connections. If standard methods don’t help, consider alternative solutions or contact Vipnet’s technical support for more specific recommendations.